Grundig M 2000 BT Manual De Instrucciones página 22

OVERVIEW
The­hi-fi­system­controls
See the figure on page 3.
The­front­of­the­device­
A CD compartment.
. Opens and closes the CD com-
partment.
8 Press briefly to switch the device
in and out of standby mode.
Press and hold down to activate
ECO mode.
●
Adjusts the audio volume.
U Headphone jack for connecting
a stereo headphone set with a
jack plug (3.5 mm).
­­­ In tuner mode: select preset
channels.
In external data media mode:
forward or reverse track selec-
tion.
In standby and timer mode: to
set hours/minutes.
In tuner mode: press and hold
3 4
down to start the reverse or
forwards frequency search;
press briefly to change the fre-
quency backwards or forwards
in steps.
In external data media mode:
search for a certain passage
forwards or backwards.
In external data media mode:
starts and pauses playback.
Switches the device on from
standby mode.
Selects the input sources Tuner,
Bluetooth, Aux In, Disc and
USB.
In external data media mode:
7
ends playback.
B
The hi-fi system displays.
22­
ENGLISH
­ - ---------------------------------------------------------------------------------------------------------------------------------
●
Infrared sensor for remote con-
trol signals.
­ USB port type A for connecting
a USB memory stick or an MP3
player.
The­back­of­the­device
AC­ ~ Socket for mains cable.
­ Note:
The only way to completely
7
disconnect the hi-fi system
from the mains supply is to
pull out the plug.
SPEAKER Terminals for connecting the
OUTPUT­(4­�) loudspeaker cables.
+­R–­­+­L­– R = right channel, L = left
channel.
AUX­IN Audio signal input (RCA) for
connecting an external device.
FM­ANTENNA
Antenna socket for the the
auxiliary antenna or the roof
antenna supplied.