Hunter 80707 El Manual Del Propietario página 13

C21
Tighten the strain relief screws.
C23
Install the wiring cover plate. Make sure all wiring connections
are inside the box or under the wiring cover plate.
C25
Reinstall the motor by inserting the tabs and pushing up into
position. Make sure the wires are not pinched between the motor
and the housing.
C22
Go to step F1 on page 20 to connect the wires as shown.
C24
C26
Secure the motor by tightening the 2 screws.
13
43053-01 12/01/2013
F1
Connect wiring from motor the motor
to the wiring cover plate.