Instruções Para Manutenção De Rotina - DOSMATIC MICRODOS II 2% Manual De Operación

Routine Maintenance Instructions
↓
Step 2.
Step 1.
Unscrew #7 OUTER CYLINDER Unscrew #52 LOWER SHAFT
from body using Dosmatic 6-1 ASSEMBLY using wrench (not
lower wrench (supplied). supplied).
Step 4. Step 5.
Spread tabs on part (193525) of Remove and replace (212501)
#52 LOWER SHAFT ASSEMBLY and Instal (193007). Note: Flared end
up. Install (193525) of #52 LOWER
slide off. Remove (193007).
SHAFT ASSEMBLY and slide on.
Step 6. Step 7.
Remove and replace # 17 O-RING Re-install #52 LOWER SHAFT, #14
O-RING and #44 DOSAGE PISTON
and re-install and tighten
using wrench.
#88 O-RING SUPPORT NUT
using Dosmatic 6-1 lower wrench.
English: 12
5%
Step 3.
Remove #52 LOWER SHAFT
ASSEMBLY, #14 O-RING and #44
DOSAGE PISTON
Step 6
Remove #88 O-RING SUPPORT NUT
using Dosmatic 6-1 lower wrench.
↓
Step 8.
Screw #7 OUTER CYLINDER onto
body Dosmatic 6-1 lower wrench.
Instruções Para Manutenção De Rotina
↓
Step 1.
Step 2.
Unscrew #52 LOWER SHAFT
Unscrew #7 OUTER CYLINDER
from body using Dosmatic 6-1 ASSEMBLY using wrench (not
lower wrench (supplied). supplied).
Step 4. Step 5.
Spread tabs on part (193525) of Remove and replace (212501)
#52 LOWER SHAFT ASSEMBLY and Instal (193007). Note: Flared end
slide off. Remove (193007). up. Install (193525) of #52 LOWER
SHAFT ASSEMBLY and slide on.
Step 6.
Step 7.
Re-install #52 LOWER SHAFT, #14
Remove and replace #17 O-RING
O-RING and #44 DOSAGE PISTON
and re-install and tighten
using wrench.
#88 O-RING SUPPORT NUT
using Dosmatic 6-1 lower wrench.
5%
Step 3.
Remove #52 LOWER SHAFT
ASSEMBLY, #14 O-RING and #44
DOSAGE PISTON
Step 6
Remove #88 O-RING SUPPORT NUT
using Dosmatic 6-1 lower wrench.
↓
Step 8.
Screw #7 OUTER CYLINDER onto
body Dosmatic 6-1 lower wrench.
Portugês: 61