RS Pro RSPD3303X Manual De Instrucciones página 19

2.4 CH1/CH2 Series mode
Instruction
In the series mode, CH1 and CH2 are linked internally into one channel which
is controlled by CH1, and the output voltage value is twice compared with that of single
channel.
Output rating 0~64V/0~3.2A
Operation steps：
1. Press the "Ser" button to start the Series mode, the indicator light turns bright
immediately and the logo "
2. Connect the load to the positive terminal of CH2 and the negative terminal of CH1.
3. Set voltage and current value:
a) Press "1" button to select the channel 1
b) Move the cursor through direction button to select the required parameter(voltage,
current),
c) Press "Fine" to select the digit position and then revolve the multi-function knob to
change the corresponding parameter.
4. Press "on/off" button corresponding CH1 to turn on the output
Note: You can identify the current working state "CC" or "CV" by referring to
light of CH1/CH2.(red means CV, yellow means CC)
" displays at the top of screen.
indicator
19