Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.3 CH3 Independent mode
Instruction
CH3 is independent from CH1 and CH2, and it works neither in parallel mode nor in series
mode. Its voltage and current ratings are respectively 2.5V, 3.3V, 5V and 3.2A.
Output ratings
2.5V/3.3V/5V, 3.2A
Operation steps:
1. Connect the load to the positive and negative terminals of CH3 on the front
2. Select the required voltage value by moving CH3 "DIP switch".
3. Turn on the output:
Press "on/off" button to turn on the output, the corresponding indicator light gets lit
immediately.
When the current value is higher than 3.2A, the overload indicator light turns red and the
working mode turns to CC from CV
Note: "overload" does not mean abnormal operation.
18
panel.
Tabla de contenido
