Factory Reset; The Peel-Off (Option) - Oki LD630T Guia Del Usuario

5-11 Factory Reset

This function is used to reset the printer settings to factory default settings.
5-11-1 How to reset the printer
1) Depress the Pause button for two seconds during Print Standby Mode.
2) Both LEDs will change to orange color and the printer will be set to Stand-alone
Configuration Mode.
3) Depress the Feed button at the 3rd LED sequence as shown in section 5-2-2 (Status
LED is Green and Error LED is blinking Red four times) to reset the printer to factory
settings, and Smart Media Detection function will be executed.

5-12 The Peel-Off (Option)

As a function that is used to peel-off labels, it is used only with label paper.
1) Open the paper cover.
2) Open the Ribbon Assembly.
3) Open the label peel-off cover and set the peeler switch to the ON position.
- Check to see that the LED has turned on.
LED
- 32 -
LD630T/LD640T
ON