Recording The Rts Transmitter; Favorite Position: My Position / Recording My Position; Operation; Mode Selection: Roller Or Tilting Mode - SOMFY Home Motion Cord Lift 32 RTS Guia De Instalacion

5.4. Recording the RTS transmitter

After recording the end limits:
Briefly press the programming button on
the back of the transmitter. The shade jogs.
The transmitter is recorded.

5.5. Favorite position: MY position / Recording MY position

If desired, to set the MY position, move the
shade to the desired position with the UP
or DOWN button then press the MY button
until the shade jogs.

6. OPERATION

6.1. Mode selection: Roller or Tilting mode

The Cord Lift 32 RTS is designed to work in 2 modes: Tilting mode or Roller mode.
This feature allows the Roll Up 28 RTS to be set according to the type of blind you are
working with.
The Cord Lift 32 RTS is set by default to work in Roller mode.
1) Move the shade away from the end
limits.
2)Simultaneously press the UP and DOWN
buttons until the shade jogs.
3) Press and hold the MY and DOWN
buttons simultaneously until the shade jogs
to change from Roller mode to Tilting mode.
8
1
2
Copyright © 2013 Somfy SAS. All rights reserved - V1 - 02/2013
PROG.
3