Troubleshooting - Vitamix Aspire Manual De Instrucciones

Your Vitamix motor is designed to protect from overheating and overcurrent conditions
during use. Both features will shut off the motor. The motor will possibly emit a slight
odor. Follow the procedures below to reset the motor for either situation. If you continue
to experience problems after following these instructions, contact your local distributor
immediately for instructions.
Overheat Protection Reset Procedure
If the motor shuts off due to overheating while blending, allow the machine to cool for 20-
45 minutes before beginning another blending cycle. If the motor will not start after being
allowed to cool, perform the Automatic Overcurrent Protection Reset Procedure below.
Overcurrent Protection Reset Procedure
1. Push the On/Off switch down to the
Off position (O).
2.
Unplug the unit.
3.
Remove the container.
4.
Turn the motor base on its side.
5.
Press the reset button on the bottom
of the machine.
6. Plug unit in and continue with the
blending cycle.
If the blender will not start immediately,
the motor is overheated. Allow the motor
to cool for 20-45 minutes before beginning
another blending cycle.
Tips to prevent "overloading"
your Vitamix machine:
• Process only Vitamix recipes when
learning to use the machine.
• Do not process recipes at lower speeds than recommended.
• Do not process recipes at higher speeds than recommended.
• Do not process recipes longer than recommended.
• Use your tamper to process thicker mixtures and keep ingredients moving around and
through the blades.
18
t
r o u b L e s H o ot i n G
Front
Back
Reset Button