Motor Technology - Schick Dental S2 Master Manual Del Usuario

7.3 motor technology

26
28
25
27
40
The milling unit S2 Master is equipped with the C2 technology.
This means extrem and stable torque in all speed ranges, silent and
vibration free running and highest balance.
With its 40.000 r.p.m. and 240 watt power the C2 milling spindle
masters even the hardest grinding and milling.
Attention: Use only tools which are in accordance to the
24
working speeds!
Maintenance of motor and spindle see „Maintenance and Care"
(point 10; page 14)
The integrated light equipment guaranties excellent illumination and
visibility of the working area.
Due to the direct connection with the milling spindle it's not necessary
to place the light always into the right position. Light exactly where
it is needed. The light equipment is joined with a plug connection
and can easily be removed and attached
adjusted by the dimmer knob (see page 6).
Please be informed that the light luminesces a little after
switching off the milling unit.
Removal of light equipment see „Operation - milling spindle"
(point 7.1; page 10)
12
Operation
. The light intensity can be