Tabla De Contenido; Installation Requirements; Tools And Parts - Kenmore Wide Electric Instrucciones De Instalación De La Secadora

DRYER SAFETY ...........................................................................
INSTALLATION REQUIREMENTS ...............................................
Tools and Parts ............................................................................. 4
Location Requirements ...................................................................5
Electrical Requirements ..................................................................6
INSTALL LEVELING LEGS...................................................................... 7
ELECTRICAL CONNECTION ................................................................. 7
VENTING ............................................................................................ 13
Venting Requirements .................................................................. 13
SEGURIDAD DE LA SECADORA ...............................................
REQUISITOS DE INSTALACIÓN ...............................................
Herramientas y piezas ................................................................22
Requisitos de ubicación ...............................................................23
Requisitos eléctricos ....................................................................24
INSTALACIÓN DE LAS PATAS NIVELADORAS .................................... 25
CONEXIÓN ELÉCTRICA .....................................................................26
VENTILACIÓN ....................................................................................32
Requisitos de ventilación .............................................................32

Tools and Parts

Gather the required tools and parts before starting installation. Read and
follow the instructions provided with any tools listed here.
Tools needed:
Flat-blade screwdriver
(magnetized)
Wire stripper
(direct wire installations)
1/4" nut driver
(recommended)
Utility knife
4
Table of Contents

INSTALLATION REQUIREMENTS

#2 Phillips screwdriver
(magnetized)
Tin snips
(new vent installations)
5/16" nut driver or socket
wrench (to remove ground
screw for 4-wire connections)
Tape measure
Plan Vent System ......................................................................... 14
2
4 Venting Kits ................................................................................. 14
Install Vent System ........................................................................15
Connect Vent ................................................................................15
LEVEL DRYER ...................................................................................... 16
COMPLETE INSTALLATION CHECKLIST ............................................... 16
REVERSE DOOR SWING (OPTIONAL) ................................................. 17
TROUBLESHOOTING ........................................................................... 19
ASSISTANCE OR SERVICE ..................................................... Back Cover
Índice
20 Planificación del sistema de ventilación ...................................... 33
Juegos de ventilación .................................................................33
22
Instalación del sistema de ventilación .........................................34
Conexión del ducto de escape .................................................... 35
NIVELACIÓN DE LA SECADORA ........................................................ 35
LISTA DE CONTROL DE LA INSTALACIÓN TERMINADA ....................36
CAMBIO DEL SENTIDO DE ABERTURA DE LA PUERTA .......................36
SOLUCIÓN DE PROBLEMAS ...............................................................39
AYUDA O SERVICIO TÉCNICO ......................................... Contraportada
Vent clamps
Pliers
Caulking gun and
compound (for installing
new exhaust vent)
Parts supplied:
Parts package is located in dryer drum. Check that all parts are included.
Adjustable wrench that
opens to 1" (25 mm) or
hex-head socket wrench
Level
Leveling legs (4)