Selecting A Base Unit; Automatic Selection; Manual Selection - Topcom Butler 2455 Manual De Operación

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

HANDL. B2455_euro.qxd
Butler 2455
• Press the Up or Down key
• Press the Programming key
• 'PIN' appears on the display.
• Enter your 4-digit PIN code in (default PIN code is '0000'). Use the number keypad.
• Press the Programming key
• 'REMOVE HS' appears on the display.
• Dial the number of the handset you want to remove (1 –5). Use the number keypad.
• Press the Programming key
• 'REMOVE HS' appears on the display and the handset is removed
• NOT SUB' appears on the handset removed.

4.28 Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit
because the handset can only communicate with one base unit at a time. There are two possibilities:

4.28.1 Automatic selection

If you set the handset to 'automatic selection', the handset will automatically choose the closest
base unit in standby.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the handset has found a base unit.

4.28.2 Manual selection

If you set the handset to 'manual selection', the handset will only choose the base unit you
have set.
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• Press the Up or Down key
• Press the Programming key
• 'BASE -' appears on the display.
• Enter the number of the base unit you want to select (1-4). Use the number keypad.
• Press the Programming key
• 'SEARCHING' and the symbol
• A signal sounds once the selected base unit has been found.
27/2/03
9:01 pm
repeatedly until 'REMOVE HS' appears on the display.
.
.
.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'AUTO' appears on the display.
.
appear on the display.
.
repeatedly until 'SETTING' appears on the display.
.
repeatedly until 'BASE SEL' appears on the display.
.
repeatedly until 'MANUAL' appears on the display.
.
.
appear on the display.
22
22
22
22
22
22
22
22
22
22
22
22
22
Page 22
Tabla de contenido

Solución de problemas

loading

Tabla de contenido