Idiomas disponibles
Idiomas disponibles
Thank you!
Thank you for choosing a Wood's air purifier! In this manual you'll find everything you need to know about your Wood's air purifier.
Please keep this instruction manual in a safe place for future reference. For best capacity and to avoid any damage to your product,
it is important that you read these instructions carefully before using your product.
Poor air quality - a health hazard.
Daily, we inhale large amounts of harmful particles in our homes. Wood's air purifiers remove 99,98% of all pollen, dust, soot,
exhaust fumes, bacteria and mould spores from the indoor air and provide an instant relief for people suffering from allergies
and asthma. People who aren't sick are also affected by air pollution and will notice the difference when the air is kept free from
particles and pollution. Wood's air purifiers also remove radioactive radon daughters from the indoor air and prevent diseases from
spreading in the workplace or in your home.
High amounts of particles and pollution is a common problem in most cities and inhaling these pollutants can impair the lung
capacity of children and even lead to serious diseases for adults. The problem increases when the outside air gets drier during the
winter. An air purifier from Wood's guarantees a healthy indoor environment, no matter where you use it and improves the air
quality before it affects your health.
1. Warnings and safety instructions
The Wood's ELFI 150 is a low voltage electrical appliance. With a voltage of only 12V, the risk of electrical shock is significantly
lowered. However, as with all electrical appliances, it is important to follow a few safety instructions:
• Always keep the appliance away from water.
• Always keep the appliance away from heat sources.
• Do not block the air flow from the unit.
• Do not use the unit outdoors.
• Wood's air purifiers must be connected to a grounded power outlet.
• Always unplug the unit before moving it, storing it, cleaning it or maintaining its filter.
• When mounting the unit to a wall, always use appropriate screws and make sure that the wall is able to hold the weight of the
air purifier. Consult a professional if you're unsure.
• If the unit is used freestanding, make sure that it is placed on a solid, flat surface.
• Careless handling or unauthorized alteration of the chord or electronics of the air purifier could void the warranty.
• The warranty is only valid upon production of a receipt.
2. Trouble shooting and technical data
The air purifier doesn't start.
•
Check that it is connected to a power source and that it is switched on.
•
Check that the filter is properly inserted in the unit.
•
Make sure that the front latch is properly closed.
No air flow from the air purifier
•
Check that the air flow isn't blocked. The air must be able to flow freely on both the bottom and the top of the air purifier.
•
Move the purifier away from any surrounding surfaces.
Noises are coming from the air purifier
•
Check that the unit is firmly mounted to the wall or placed on a flat surface.
•
Check if the filter needs replacing. A too dirty filter may block the air flow, causing noise.
Maximum working area
Air flow step 1
Air flow step 2
Air flow step 3
Energy consumption (Step 1/Step 2/Step3)
Sound level
Voltage
Purification level
Dimensions, mm LxWxH
Weight
Colour
6
English
30m
2
50m
3
/h
75m
3
/h
150m
/h
3
3W/4W/10W
From 25dB
12 V
99,98%
105x505x500
6,9kg
White
3. Using your Wood's air purifier
• Mount the air purifier to a wall or place it on a level ground in the middle of the room. If you mount the unit to a wall, make sure
that the wall is able to hold the weight of the air purifier. Please refer to Fig. C for more information.
• Fasten two screws to the wall according to the holes on the back of the unit. Hang the unit on the screws.
• Connect the unit to a grounded power outlet.
• Switch the air purifier on and choose fan speed with the fan speed knob on the side of the unit, underneath the front cover (see
Fig. A). The Wood's ELFI 150 lets you choose between 3 fan speeds; a higher fan speed means higher air flow and faster purifica-
tion but also slightly higher power consumption and noise levels. Please refer to Fig. A for more information.
• When the air purifier is running, you can feel the air flow from the top of the unit.
• For best results, leave the air purifier running continuously, even during the night or when you leave the house.
• The filter in the unit needs to be replaced regularly, at least once every six months. Read more about replacing the filter below.
• For best results, place the air purifier in the centre of the room. Make sure that the air flow isn't blocked.
4. Workings of your Wood's air purifier
The Wood's ELFI 150 circulates the air through the room with a fan, taking in air from its bottom side and exhausting clean air from its
top. For optimum air purification, it is usually recommended that the air purifier is powerful enough to circulate the air through the
room twice every hour. This unit is therefore recommended for rooms up to 30m
environment, for example very dirty rooms or rooms where people smoke, you need to circulate the air more often. The maximum
working area might therefore be smaller than in a less demanding environment. A demanding environment will also affect how often
you need to replace the filter in the unit. We therefore recommend that you check the filter regularly and replace the filter when
needed. Please refer to the filter chapter below for more information.
When the air is circulated in the room and passed through the ionization part of the air purifier, the particles in the air are given a posi-
tive charge. When the air passes through the air purifier, the charged air particles are drawn to the Active ION HEPA filter where they
stick. This technique is not only very efficient, it also allows for a low filter density. By using an electrical charge to separate the particles
from the air, Wood's doesn't have to rely on the density of the filter to receive a high level of purification. This means that no noisy and
energy consuming fans are needed to circulate the air, which is needed in purifiers using traditional filters of the same capacity.
5. Cleaning and filter maintenance
Wood's air purifiers are easy to clean and maintain. If needed, use a damp cloth to clean the outside of the purifier. Avoid using
solvents or strong cleaners as this may damage the surface of the air purifier.
Filter change
The Active ION HEPA filter in the Wood's ELFI 150 needs to be changed regularly due to its ionization. To receive the full, 10 years
warranty make sure to change the filter at least once every six months. However, the filter may need to be replaced more often
depending on the environment. The filter also has a status indicator that shows when it needs replacing.
1.
Switch the air purifier off and unplug it from the power outlet.
2.
Open the air purifier by lifting up the front latch.
3.
Remove the consumed filter.
4.
Insert a new filter as marked by the arrows on the filter.
5.
Close the air purifier and reconnect it to the power outlet.
Access the filter by lifting up the front latch of the unit. Please refer to Fig. B for more information.
6. 10 years warranty program
Wood's air purifiers are of the highest quality and capacity and that is why Wood's are able to leave as much as 10 years warranty on
all air purifiers. All you have to do is follow a few easy steps:
•
Register your air purifier at www.woodsairpurifiers.com.
•
Change the air purifier's filter at least once every six months.
•
New filters can be purchased at your local retailer.
•
For more information, please visit www.woodsairpurifiers.com.
NOTE: Make sure to save all receipts, even for the filters. These are needed for all warranty claims.
If you don't wish to enter the warranty program, you still have 2 years warranty on your air purifier.
English
2
, depending on the environment. In a demanding
7
