Fuel; Physical Condition; Area And Equipment Inspection - Shindaiwa BP35 Manual Del Proprietario / Usario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Fuel

Handle fuel with care.
It is highly flammable.
a) Use an appropriate type of fuel container.
b) Do not smoke or bring flame or sparks near to fuel supplies.
c) The fuel tank may be under pressure.
Always loosen the fuel cap and wait for pressure to be equalized before removing the cap.
d) Fill the fuel tank outdoors over bare ground and install the fuel cap securely.
Do not pour fuel indoors.
e) Wipe any spilled fuel off the unit.
Then move at least 3 m from the fuelling spot before starting the engine.
f) Never refuel while the engine is still hot, or fuel a running engine.
g) Do not store the unit with fuel in its tank, because a fuel leak could start a fire.

Physical condition

You should be in good mental and physical health.
Do not operate if you are under the influence of alcohol or any medication or substance
which could affect your vision, dexterity or judgement.
For your own health and your safe and comfortable work, operate the machine within the
air temperature range of -5ºC to 40ºC.

Area and equipment inspection

Improper fit will result fly off the cutting attachment.
Never start the engine if the power transmission shaft is not in place to prevent the
engine from over speeding or the clutch from flying apart.
Inspect the area before using the unit.
Remove objects the unit could throw.
Remember where there are obstructions to be avoided.
Inspect the unit before using it.
Perform only maintenance or adjustments for which the Operator's Manual gives instruction.
Do not try to repair the unit without proper instruction.
The unit should be serviced only by trained shindaiwa dealer servicemen with the proper
tools.
Be sure that:
a) Engine does not leak fuel.
b) Fasteners are tight, and none are missing.
c) Silencer is in good condition.
d) The unit has the proper equipment-shield, handles, harness, etc.-for the cutting attachment
to be used.
e) If used on the unit, the cutting attachment is properly tightened.
WARNING
7

Hide quick links:

Tabla de contenido
loading

Este manual también es adecuado para:

B530

Tabla de contenido