Information And General Warnings; Information About The Instruction Manual; Introduction; General Dangers - Riello RL 42 BLU Instrucciones De Instalación, Montaje Y Funcionamiento

2

Information and general warnings

2.1

Information about the instruction manual

2.1.1

Introduction

The instruction manual supplied with the burner:
➤ is an integral and essential part of the product and must not
be separated from it; it must therefore be kept carefully for
any necessary consultation and must accompany the
burner even if it is transferred to another owner or user, or to
another system. If the manual is lost or damaged, another
copy must be requested from the Technical Assistance Ser-
vice of the area;
➤ is designed for use by qualified personnel;
➤ offers important indications and instructions relating to the
installation safety, start-up, use and maintenance of the
burner.
Symbols used in the manual
In some parts of the manual you will see triangular DANGER
signs. Pay great attention to these, as they indicate a situation of
potential danger.
2.1.2

General dangers

The dangers can be of 3 levels, as indicated below.
Maximum danger level!
This symbol indicates operations which, if not car-
ried out correctly, cause serious injury, death or
DANGER long-term health risks.
This symbol indicates operations which, if not car-
ried out correctly, may cause serious injury, death
or long-term health risks.
WARNING
This symbol indicates operations which, if not car-
ried out correctly, may cause damage to the ma-
chine and/or injury to people.
CAUTION
20023224
Information and general warnings
2.1.3
Other symbols
➤ This symbol indicates a list.
Abbreviations used
Ch.
Fig.
Page
Sec.
Tab.
Delivery of the system and the instruction manual
When the system is delivered, it is important that:
➤ the instruction manual is delivered to the user by the system
➤ The instruction manual shows:
➤ The system supplier must carefully inform the user about:
4 GB

Danger: live components

This symbol indicates operations which, if not car-
ried out correctly, lead to electric shocks with le-
thal consequences.
DANGER
ENVIRONMENTAL PROTECTION
This symbol gives indications for the use of the
machine with respect for the environment.
Chapter
Figure
Page
Section
Table
manufacturer, with the recommendation to keep it in the
room where the heat generator is to be installed.
- the serial number of the burner;
........................................................................................
- the address and telephone number of the nearest Assis-
tance Centre.
........................................................................................
........................................................................................
........................................................................................
- how to use the system,
- any further tests that may be required before activating
the system,
- maintenance, and the fact that the system should be
checked at least once a year by a representative of the
manufacturer or another specialised technician.
To ensure a periodic check, the Manufacturer recom-
mends the drawing up of a Maintenance Contract.