Kohler K-702200 Guía De Instalación Y Cuidado página 19

8.
Install the Hanging Brackets — Outside Panel
Hanging Bracket
Support d' accrochage
Soporte de suspensión
Roller/Rouleau/Rueda
8-32 x 1/4" Bolt
Boulon 8-32 x 1/4"
Perno 8-32 x 1/4"
CAUTION: Risk of injury or product damage. Unframed tempered glass should
not contact hard surfaces or it may shatter. Do not touch the edge of the tempered
glass panel with tools or any hard objects. Do not set unframed tempered glass
directly on the floor.
Insert a bushing into one of the holes at the top of the outside glass panel.
Install a hanging bracket over the glass panel, aligning the hole in the bracket
with the bushing.
Insert a blind nut into the hanging bracket hole and bushing. Secure with a #8-32
x 1/4" machine screw.
Repeat the steps to install the other bracket on the outside panel.
IMPORTANT! The steel side of the roller must be installed against the hanging
brackets.
Install the rollers on the same side as the bottom frame leg.
Assemble the rollers and #8-32 x 3/8" machine screws to the hanging brackets
through the center hole of the bracket.
Secure the rollers.
Kohler Co.
Bushing/Manchon/Buje
Install outside panel roller.
Installer le rouleau du
panneau extérieur.
Instale la rueda del panel
exterior.
Rollers on same side as bottom frame leg.
Placer les rouleaux du même côté du pied de cadre inférieur.
Las ruedas deben estar en el mismo lado que la pata del
marco inferior.
19
8-32 x 3/8" Machine Screw
Vis mécanique 8-32 x 3/8"
Tornillo para metal 8-32 x 3/8"
Blind Nut
Écrou borgne
Tuerca ciega
1063221-2-C