SFA SANICONDENS mini Instrucciones De Instalación página 7

8
STANDARDS
SANICONDENS Mini conforms to the European directive
®
89/336/CEE on electrical safety.
INSTRUCTIONS INTENDED SOLELY FOR
QUALIFIED PROFESSIONALS
9
DISASSEMBLY
If a breakdown occurs, any service on the unit should be
carried out by a qualified engineer. In particular the
replacement of the power cable.
Disconnect the electrical supply before carrying out
work on the unit.
1 0
TROUBLESHOOTING
INSTRUCTIONS RESERVED SOLELY FOR
QUALIFIED PROFESSIONALS
Disconnect the electrical supply before carrying out any work.
FAULT DETECTED PROBABLE CAUSES
• The pump does not start • The pump is not
connected to the power
supply
• Power cut
• Float blocked
• Condensates inlet pipe
blocked
• The pump does not lift
• Non-return valve blocked
• Discharge pipe blocked
1 1
GUARANTEE
SANICONDENS Mini SFA is guaranteed for 2 years for
®
parts and labour, subject to correct installation and use of
the unit.
ACTION NEEDED
• Plug in the unit.
• Check the mains voltage.
• Clean the SANICONDENS
®
Mini tank.
• Clean the SANICONDENS
®
Mini inlet pipe.
• Clean the valve.
• Clean the discharge pipe.