Care And Cleaning; Cleaning Chart; Hood Surface Cleaning - Thermador HDDB30WS Manual De Instrucciones

Care and Cleaning

Grease Filters Cleaning
WARNING
Be sure the entire appliance (including the filters
and lights) has cooled and grease has solidified
before attempting to clean any part of the
appliance.
Your hood has removable aluminum mesh filters. They must
be cleaned when the FILTER light illuminates on the touch
panel or whenever they collect grease. When used over a
grill, wok or other high grease applications, more frequent
cleaning may be required.
The filters may be washed by hand or in the dishwasher.
Soak the ventilation filters in hot water using a mild deter-
gent. Rinse well and shake to dry.
Slight discoloration can occur when cleaning the filters in
a dishwasher. This has no influence on the function of the
grease filters.
NOTE: Reverse the directions below to remove the filters.
Ensure filters are cool and grease has solidified before
removal.
NOTE: Do not use cooktop, rangetop, or range while hood
is disassembled.
To Install Filters:
• Remove the filter by pulling the spring release filter
latch and then pulling down the filter.
• Reinstall the filter by making sure the spring release
filter latch is toward the front. Insert aluminum filter
into upper track.
• Push in spring release filter latch.
• Push up on aluminum filter and release handle to latch
into place.
Access additional tips and tricks through the Home Con-
nect™ app.
Use and Care Guide

Cleaning Chart

Anodized Wash top and underside with hot sudsy
Aluminum water.
Surfaces Rinse and wipe dry or apply Fantastic®
or Formula 409
or paper towel and wipe clean. DO NOT
USE powdered cleaners or steel wool
pads.
Aluminum Clean filters in the dishwasher or by
Mesh Filters agitating in sudsy water. Ensure that
there is no soil trapped in the fine mesh.
Dry the filters before reinstalling them.
Plastic DO NOT REMOVE control buttons.
surfaces Wipe with a moist soapy sponge. Rinse
and dry.
Painted For general care, wipe the outside of the
surfaces hood with sudsy water or household
cleaners such as Fantastic or Formula
409, rinse well and dry with a clean soft
cloth to avoid water marks. DO NOT USE
powdered cleansers or steel wool pads.
Stainless Wipe and dry stainless steel in the same
Steel direction as the grain. Avoid using too
Surfaces much pressure, which may mar the
surface. To remove finger prints and give
added shine, use cleaners such as
Stainless Steel Magic. Do not allow any
cleaning compounds to remain in contact
with stainless steel for extended periods.

Hood Surface Cleaning

• For general care, wipe the outside of the stainless
steel with mild, lukewarm, soapy water. Always wipe
and dry in the direction of the stainless steel grain.
Avoid using too much pressure, which may mar the
surface.
• DO NOT use abrasive products such as steel wool.
• DO NOT use cellulose sponges. Some sponges are
processed with salt and can cause corrosion by
leaving salt deposits on the metal.
• DO NOT allow any cleaning compounds to remain
in contact with stainless steel for extended periods.
• DO NOT USE CHLORINE-BASED CLEANERS.
• To remove fingerprints and produce added shine, use
a stainless steel cleaner or conditioner. The
THERMADOR Stainless Steel Conditioner can be
purchased online (US only) at:
www.store.thermador.com (order part number
00576697).
first to a clean sponge
®
English | 15 |