TEUFELBERGER ROCKY Manual De Instrucciones página 11

Pic. 3
Maximum nominal load: 130 kg
(= maximum weight of user incl. tools and gear)
CAUTION! When using these products in a fall pro-
tection system, it is imperative to observe the perti-
nent specifications contained in the manufacturer's
information for the products used!
2. How to select an anchor point:
According to EN 795, the anchor point (anchor de-
vice) for personal protective equipment against falls
from a height must be able to withstand a force of
12 kN and meet the requirements specified in the
user's guide of the fall protection system used. The
anchor point should always be located above the
user.
b. Front connection - EN 813
Fix the connecting element (carabiner) at the device
by hooking it into the front fixing eyelet of the waist
belt (Pic. 4A) and hook the rope end with the stit-
ched loop and the carabiner directly at the anchor
point (carabiner freely movable, no transverse load,
...).
To reduce the distance, the free rope end must be
pulled (Pic. 4B), to increase the distance, grasp the
device, turn it slightly and hold the loose rope in
your hand to avoid jerky, uncontrolled slackening.
(Pic. 4C).
Pic. 4
The connection between the harness and anchor
point must be suitable for the standard covering the
respective type of use and must have been certified
to it.
Fall arrest system (e.g., energy absorber to
�
EN 355, guided type fall arresters to EN 353-
1/2, retractable type fall arresters to EN 360)
� Restraint system (e.g., lanyards to EN 354 or
EN 358)
� Work positioning system (e.g., lanyards to
EN 354 or EN 358)
� Rope access system (e.g., rope adjustment
device to EN 12841, rope to EN 1891)
USE
11