Electronic Equipment; Serial Port; Backup Battery - EdilKamin SALLY Instalación Uso Y Mantenimiento

• ELECTRONIC EQUIPMENT

LEONARDO is a combustion safety and control system which allows optimal performance in all
®
conditions thanks to two sensors measuring the pressure level in the combustion chamber and smoke
temperature.
The detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
The LEONARDO system offers constant combustion, automatically regulating the draft based on the
®
characteristics of the chimney flue (bends, length, shape, diameter, etc.) and environmental conditions
(wind, humidity, atmospheric pressure, installations at high altitude, etc.).
The standards for installation must be respected.
The LEONARDO system is also able to recognise the type of pellets and automatically adjust the flow
®
moment by moment to ensure the required level of combustion.

SERIAL PORT

The Dealer can install an optional on the AUX outlet for controlling the process of
switching on and off (e.g. telephone remote, local thermostat), located at the rear of
the stove. This can be connected via special optional trestle (code 640560).

BACKUP BATTERY

A backup battery is found on the control board (3-Volt CR 2032 battery). Its malfun-
ction is indicated with the following messages (not considered a defect but due to
normal wear-and-tear): "Battery check". For more detailed information, please contact
the DEALER who performed the first 1st ignition.
FUSE *
Two fuses are inserted in the socket with switch, located on the back of the stove, one
of which operational * and the other is held in reserve **.
CHARACTERISTICS
- 27
-
* **