Information For Users - Italiana Camini NELLY Instalación Uso Y Mantenimiento

Tabla de contenido

Idiomas disponibles

REMOTE CONTROL code 633280

: ignition / shutdown button

: button to increase the power/operating temperature

(when inside a menu, it increases the displayed varia

ble)

: button to increase the power/operating temperature

(when inside a menu, it decreases the displayed varia

ble)

: button to toggle from manual and automatic mode

: button to toggle from automatic to manual mode

- the remote control transmits by means of an infrared signal

within a range of 4-5 metres. The LED transmission signal

must be in line with the receiving LED of the stove for the

signal to be transmitted correctly. This must also be in a free-

ﬁ eld environment, therefore, free of obstacles.

- the remote control works with 3 alkaline 1.5V AAA batteri-

es. Their duration depends upon usage, however, the average

duration is that of an entire season.

- when a button is pressed, the backlight goes on, which

indicates that the remote control is transmitting the signal. The

"beep" emitted by the stove conﬁ rms its reception.

- the remote control must be cleaned with a damp cloth and no

detergents or liquids must be sprayed onto it. In any case, use

neutral detergents which are free from aggressive substances.

- handle the remote control with care. It could easily break if

dropped, due to its size.

Moreover, all operations implemented from the synoptic panel

can also be implemented from the remote control.

- The operating temperature is: 0-40°C

- The correct storage temperature is :-10/+50°C

- Operating humidity is: 20-90% R.H with no condensation

- Degree of protection is: IP 40

- Weight of remote control with batteries: 160gr

In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, "Implementation of Directives: 2002/95/

EC, 2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and electronic

equipment, as well as disposal of waste".

The crossed-out wheeled bin symbol shown on the equipment or on the packaging indicates that the product must be dispo-

sed of separately at the end of its useful life. Therefore, at the end of the equipment's useful life, the user must hand in the

equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer when a new, equiva-

lent appliance is purchased in a ratio of one to one.

INSTRUCTIONS FOR USE