Tabla de contenido
Setup Network for Rework Station HR 550
Setup Network for Rework Station HR 550
Ersa recommends using an Intel® network adapter. Use the manufacturer's latest driver.
1. Install the network driver. Double-click the driver file and follow the instructions on the screen. Do
not change any settings.
2. Klick the small monitor icon at the PC clock on the right bottom of the screen and select Network
and Sharing Center.
3. Click Change adapter settings. The Network connections window opens.
4. Right-click Ethernet and here select Properties.
5. Select Internet protocol version 4 and click Properties.
6. In this window enter the IP-address 169.254.10.2
7. and Subnet mask 255.255.255.0.
8. Click OK.
9. Select Client for Microsoft Networks and click Configure.
10. Select the Advanced tab.
11. Select Jumbo Packet and under Value select the largest value.
12. Click OK.
13. Finally, restart the PC.
1
March 2017
Tabla de contenido
