Maintenance; Clean The Machine; Technical Data - Powerworks XB 20V Manual Del Operador

1. Before cutting any type of wood, be sure the work
piece is firmly anchored or clamped to prevent
slipping.
2. Place blade and shoe lightly against work to be cut.
3. Switch on saw motor before applying pressure.
Metal cutting
1. In thin gauge sheet metals it is best to clamp wood
to the underside of the sheet. This will ensure a
clean cut without excess vibration or tearing of
metal.
2. Avoid forcing cutting blade as this reduces blade life
and causes costly blade breakage.
Pocket cutting
1. Measure the surface area to be cut and mark clearly
with a pencil, chalk or scriber.
2. Insert blade in blade clamp and tighten blade clamp
securely.
3. Tip the saw backward until the bottom edge of the
shoe is resting on the work surface.
4. Switch motor on, permitting blade to attain
maximum speed.
5. Grip handle steadily and begin a slow, deliberate
upward swing with the handle of the saw.
6. The blade will begin to feed into material. Always be
sure blade is completely through material before
continuing with pocket cut.
English
Always hold saw firmly with both hands while cutting.
Whenever possible, the shoe must be held firmly
against the material being cut. This will prevent the
saw from jumping or vibrating and minimize blade
breakage..
7

MAINTENANCE

Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
Remove the battery pack from the machine before
maintenance.
7.1

CLEAN THE MACHINE

The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
8

TECHNICAL DATA

Rated Voltage
No Load Speed
Stroke Length
Weight without battery
Battery model
Charger model
9
WARNING
CAUTION
CAUTION
WARNING
CAUTION
20 V
0-2800 RPM
7/8 " (22 mm)
3.75 lbs
BAP series
CAP series
EN