Install The Battery Pack; Remove The Battery Pack; Install The Blade; Remove The Blade - Powerworks XB 20V Manual Del Operador

5.2

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
5.3

REMOVE THE BATTERY PACK

1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
5.4

INSTALL THE BLADE

NOTE
Before you install the blade, remove the battery pack
from the machine.
English
1. Turn the blade release clamp counterclockwise and
hold.
2. At the same time, push the blade to the deepest
position.
3. Release the blade release clamp.
Make sure that the blade is tightened.
5.5

REMOVE THE BLADE

1. Turn the blade release clamp counterclockwise and
hold.
2. At the same time, pull the blade out.
3. Release the blade release clamp.
5.6

INSTALL THE SHOE

1. Loosen the shoe release screw with a hex wrench.
2. Push the shoe into the machine.
Make sure that the shoe is tightened.
7
NOTE
NOTE
EN