Power Tool Use And Care; Battery Tool Use And Care; Service; Specific Safety Rules - Powerworks XB 20V Manual Del Operador

2.4

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it
was designed.
• Do not use the power tool if the switch does not turn
Any power tool that cannot be
it on and off.
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
Such preventive safety measures
power tools.
reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
Many accidents are caused by poorly
before use.
maintained power tools.
• Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
Use of the power tool for operations
performed.
different from those intended could result in a
hazardous situation.
2.5

BATTERY TOOL USE AND CARE

• Recharge only with the charger specified by the
A charger that is suitable for one type
manufacturer.
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
Use of any other battery packs may
battery packs.
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with plenty of soap and
water. If liquid contacts eyes, immediately seek
Liquid ejected from the battery may
medical help.
cause irritation or burns.
English
The correct power tool will
Properly
2.6

SERVICE

• Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is
maintained.
2.7

SPECIFIC SAFETY RULES

• Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
• Know your power tool. Read operator manual
Learn its applications and limitations, as
carefully.
well as the specific potential hazards related to this
power tool. Obey this instruction will reduce shock,
fire or serious injury.
• Always wear safety glasses with side shields
marked to comply with ANSI Z87.1.
instruction will reduce the risk of serious injury.
• Protect your lungs. Wear a face or dust mask if the
Obey this instruction will reduce
operation is dusty
the risk of serious injury.
• Protect your hearing. Wear hearing protection
during extended periods of operation.
instruction will reduce the risk of serious injury.
• Battery tools do not have to be plugged into an
electrical outlet; thus, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing
Obey this instruction will reduce the risk
accessories.
of electric shock , fire, or serious injury,
• Do not place battery tools or their batteries near fire
This will reduce the risk of explosoion and
or heat.
possibl injury.
• Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been
dropped or received a sharp blow.
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
• Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of
serious injury, never use any cordless product in the
presence of open flame.
propel debris and chemicals. If exposed, flush with
water immediately.
• Do not charge battery tool in a damp or wet
Obey this instruction will reduce the risk of
location.
electric shock.
• For best results, your battery tool should be charged
in a location where the temperature is more than
50°F but less than 100°F.
serious injury, do not store outside or in vehicles.
• Under extreme usage or temperature conditions,
battery leakage may occur.
with your sink, wash immediately with soap and
5
This
Fasteners
Obey this
Obey this
A damaged
An exploded battery can
To reduce the risk of
If liquid comes in contact
EN