Beta 1464T Manual De Instrucciones página 9

INSTRUCTIONS FOR USE
In the next picture you can see that the upper part of the tester accommodates a keypad with the start key and the
start and battery charge LED indicators.
The upper part of the tester accommodates a start button. Press it briefly to start or turn off the instrument.
Once the tester has started, a splash screen with a logo will be displayed. Touching the display will bring up the
menu. Use the arrows to change the selected option. When the required option is displayed, press the relevant
button to select it.
When using the tester for the first time, select first the "Configuration" option and then the required options. When
the configuration screen is exited, it will be saved automatically. As you can see in the picture below, you can
configure the language, the brightness of the screen, the volume of the loudspeaker, the unit of measurement (bar/
PSI) and the colour of the text can be selected.
If any option is selected, the instrument will show what sensor should be used and where it should be connected
(see next picture). Connect the sensor as shown and press "OK". The measurement screen will be displayed.
EN
9