Selector Switch - Bio Green PHOENIX PHX2.8/US Instrucciones De Instalación Y Operación

Selector switch:

Item Selector switch 1
0
1
2a
2b
3a
1000
3b
4a
1800
4b
5a
2800
5b
Step 1: Select the desired operating
mode on selector switches 1 and 2.
Depending on the size and location
of the greenhouse we recommend
selecting a heating performance of
2800 watts or 1800 watts in the winter
months. On the other hand, the low-
er performance of 1000 watts is often
sufficient in the transition periods
(autumn and spring).
Selector switch 2
1800 watts: Ideal frost protection up
to a greenhouse size of approximately
136 sq.ft. (12 m²). 2800 watts: Ideal
frost protection up to a greenhouse
size of approximately 216 sq.ft. (20 m²).
Note: If you have sensitive plants in
your greenhouse over the winter (e.g.
cacti) that cannot tolerate fluctuating
temperatures then we recommend
9
Function
Appliance not in operation
Circulating air without heating
(circulating air controlled
by thermostat)
Circulating air without heating
(circulating air in constant operation)
1000 W heating performance with
circulating air (heating and circula-
ting air controlled by thermostat)
1000 W heating performance with
circulating air (heating controlled by
thermostat, circulating air in cons-
tant operation)
1800 W heating performance with
circulating air (heating and circula-
ting air controlled by thermostat)
1800 W heating performance with
circulating air (heating controlled by
thermostat, circulating air
in constant operation)
2800 W heating performance with
circulating air (heating and circula-
ting air controlled by thermostat)
2800 W heating performance with
circulating air (heating controlled by
thermostat, circulating air in cons-
tant operation)