Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• These operating instructions are
part of the apparatus and should
be kept in a safe place. If the
apparatus is passed on to third
parties, it must be passed on
together with the operating
instructions.
• In industrial facilities, the Accident
Prevention regulations for electrical
installations and operating
materials of the industrial
employer's liability insurance
association are to be observed.
• Never spill fluids on the apparatus.
There is a danger of fire or lethal
electric shock. In such an event,
unplug the mains and consult a
skilled person.
• Should you be unsure about the
proper connection or should any
questions arise that are not dealt
with in these operating instructions,
please contact the manufacturer
or an authorized person.
• This apparatus may not be
operated by persons
(including children) with limited
physical, sensory
• or mental faculties, or by persons
who are not sufficiently
experienced or adequately
• knowledgeable in the use of the
product, unless such persons are
supervised or instructed in the use
of the apparatus by a person
responsible for their safety.
5. Installation
The electrical applaince may only
be operated from earth leakage pro-
tected sockets! Before operating
the apparatus, ensure that this is
the case for the socket to be used.
Make sure that the maximum current
is not exceeded when the outlet has
more than one socket or when using
extension chords. cable reels must
always be fully unwound. Ensure that
the air circulation heater is discon-
nected from mains before or during
installation. Select a place for instal-
lation where the apparatus will not be
exposed to rain or may fall into water.
Route the connecting cable such that
it will not be a stumbling hazard, can-
not be crushed or come into contact
with hot objects. Use only extension
leads matched to the power rating of
the apparatus and complying with the
applicable safety regulations. Do not
wind the connecting lead around the
apparatus and never operate the ap-
paratus with a coiled lead.
Standing installation:
To use the PHX 2.8/US greenhouse
heater as a floor mounted apparatus,
the supplied feet must first be fitted.
The following supplied components
are required for assembly:
2 x PHOENIX feet
4 x self tapping screws
4 x serrated washers
Have a Phillips screwdriver at hand.
The PHOENIX heater comes with
pre-drilled holes in the housing for
attaching the feet. Fasten the feet
here, using the self tapping screws
with serrated washers (see illustra-
tion on Page 2). Your PHOENIX air
circulation heater is now ready to
use as a floor-mounted apparatus.
7
Tabla de contenido
