Tabla de contenido
Idiomas disponibles
Idiomas disponibles
IN CASE OF AIR LEAK
After long time use, the valvemay let out air :
1. Use the spanner (included) and turn clockwise to tighten the valve. No need to force too much.
2. If option 1 does not work, unscrew the head of the valve, you can also add some silicone grease or
vaseline petroleum jelly.
1
3
•
Re-assemble the outer valve back into the inner valve seat by reversing the removal procedure.
Make sure you do not cross-thread the valve assembly and only use your hands to re-fit the outer
valve to the inner valve seat.
•
Once fully inserted and screwed on, then and only then, use the spanner to screw the final turn. Be
sure not to over tighten the assembly as this will damage the valve and its ability to hold air pressure.
The maintenance spanner provided in the bag is used to tighten the valve in case of need or for mainte-
nance. NOT TO USE IT To deflate the SUP.
14/01/2020
2
4
EN
43
Tabla de contenido
