Operation Parameter - HTW ECO THERMAL PLUS Manual De Usuario/Instalador

The service call can show the service phone or mobile
nember.The installer can input the phone number.See
''FOR SERVICEMAN''.
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
PHONE NO. 0000000000000
MOBILE NO. 0000000000000
Error code is used to show when the fault or proction
happen and show the mean of the error code.
SERVICE INFORMATION
SERVICE
ERROR
PARAMETER
CALL
CODE
14:10
E2 #00
E2 14:00
#00
E2 #00 13:50
13:20
E2 #00
ENTER
OK
Press OK the page will appear:
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
#00
E2
14:10
#00 14:00
E2
#00 13:50
E2
#00
E2
13:20
ENTER
OK
press OK to show the mean of the error code：
E2 comunication fault between
controller and indoor unit
Please contact your dealer.
COMFIRM
OK
INFORMATION
i
A total of eight fault codes can be recorded.
The parameter function is used to display the main
parameter, there are two pages to show the parameter:
DISPLAY
DISPLAY
01-01-2018
01-01-2018
01-01-2018
01-01-2018
1/2
DISPLAY
01-01-2018
01-01-2018
01-01-2018
01-01-2018
#00
19
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
ROOM SET TEMP.
MAIN SET TEMP.
TANK SET TEMP.
ROOM ACTUAL TEMP.
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
MAIN ACTUAL TEMP.
TANK ACTUAL TEMP.
SMART GRID RUNNING TIME
The DISPLAY function is used to set the interface:
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
TIME
DATE
LANGUAGE
BACKLIGHT
ENTER
OK
SERVICE INFORMATION
SERVICE ERROR
PARAMETER
CALL CODE
BUZZER
SCREEN LOCK TIME
SMART GRID RUNNING TIME
ON/OFF
ON/OFF
Use ''OK'' to enter and use ''◄ ''、 ''► ''、 ''▼ ''、 ''▲'' to
scroll.

6.8 Operation Parameter

This menu is for installer or service engineer reviewing
the operation parameter.
At home page, go to ''MENU'' > ''OPERATION
PARAMETER''.
Press ''OK''. There are six pages for the operating
parameter as following. Use ''▼ ''、 ''▲'' to scroll.
1/2
DISPLAY
26℃
55℃
55℃
24℃
2/2
DISPLAY
26℃
55℃
0 Hrs
1/2
DISPLAY
12:30
08-08-2018
EN
ON
2/2
DISPLAY
ON
120SEC
2 Hrs