Adjusting Space Operation Mode; Operation; Operation Mode; Preset Temperature - HTW ECO THERMAL PLUS Manual De Usuario/Instalador

15

5.4 Adjusting space operation mode

Adjusting space operation mode by interface
Go to ''MENU'' > ''OPERATION MODE'' . Press"OK",
the following page will appear:

OPERATION MODE

Operation mode setting：
HEAT
COOL
CONFIRM
O K
There are three modes to be selected including
HEAT, COOL and AUTO mode. Use the ''◄''， ''►''
to scroll, press "OK" to select.
Even you don't press OK button and exit the page by
pressing BACK button, the mode would still be
effective if the cursor had been moved to the
operation mode.
If there is only HEAT(COOL) mode, the following page
will appear:
OPERATION MODE
Operation mode can only be set
heat mode:
HEAT
CONFIRM
O K
OPERATION MODE
Operation mode can only be set
cool mode:
COOL
CONFIRM
O K
AUTO
A
08
The operation mode can not be changed.
If you
Then the space operation mode is...
select...
Always heating mode
HEAT
Always cooling mode
COOL
Automatically changed by the software
based on the outdoor temperature (and
depending on installer settings of the
indoor temperature), and takes monthly
restrictions into account.
A
Note: Automatic changeover is only
AUTO
possible under certain conditions.
See the ''FOR SERVICEMAN''> ''AUTO
MODE SETTING'' in "Installation and
owner's manual".
Adjust space operation mode by the room thermostat
, see ''ROOM THERMOSTAT'' on "Installation and
owner's manual ".
Go to ''MENU''>''OPERATION MODE'', if you press
any key to select or adjust, the page will appear:
Cool/heat mode is controlled by
the room thermostat.
Please adjust the operation mode
by the room thermostat.
CONFIRM
O K

6 OPERATION

See "5.4 Adjusting space operation mode"

6.2 Preset Temperature

PRESET TEMPERATUER has PRESET TEMP.\
WEATHER TEMP. SET\ECO MODE 3 items.
6.2.1 PRESET TEMP.
PRESET TEMP. function is used to set different
temperature on different time when the heat mode or
cool mode is on.
PRESET TEMP. =PRESET TEMPERATUER
The PRESET TEMP. function will be off in these
conditions.
1 ) AUTO mode is running.
2) TIMER or WEEKLY SCHEDULE is running.
Go to ''MENU'' > ''PRESTE TEMPERATURE''
>''PRESET TEMP''. Press ''OK''.
The following page will appear: