The Operation Panel; Print A Demo Page; Computer Connection - Oki С3600n Guia De Instalacion

The Operation Panel

The Operation Panel allows operator
intervention and indicates both when the
printer is operating normally and when it
requires attention. Detailed printer status
is provided by the Status Monitor in
Windows or Printer Driver in Macintosh.
1
The Operation Panel incorporates 2 LEDs,
a two-line LCD, and 6 push-buttons as
follows (from left to right):
LED (amber):
1 ATTENTION
LED (green)
ON LINE
2
LCD
3
Menu Back button
4
Menu Up button, Menu Down button
5
Menu Enter button
6
switch
ON LINE
7
switch
8 CANCEL
The buttons are used to operate the
printer; the LEDs and LCD display the
status of the printer.

Print a Demo Page

Press the button on your printer
ENTER
1
to display
INFORMATION MENU
LCD.
Press to select the menu.
ENTER
2
Press the
3 DOWN ARROW
displayed on the LCD.
Press to print the demo page.
ENTER
4
Print the Menu Map
The Menu Map prints a list of all the
printer's menus and their current
settings.
Press the button on your printer
ENTER
1
to display
INFORMATION MENU
LCD.
C M Y K
on the
until is
DEMO1
on the
C3600n Setup Guide
Press to select the menu.
ENTER
2
PRINT MENU MAP
3
LCD; press
ENTER
map.

Computer Connection

Install Network Cable
Turn the printer
1
Locate the LAN port (A). Remove the
2
plastic cap.
Connect the Ethernet cable between
3
the printer and the Ethernet hub or
router.
A
USB Connection
NOTE: Windows USB—Install the printer
software BEFORE installing the USB cable. See
"Install the Driver" on page 9.
NOTE: Printer operation is not assured if another
USB compatible device is connected concurrently
with it.
Connect the USB Cable
Turn the printer OFF.
1
Connect the USB cable to the USB port
2
on the computer, then to the USB port
on the printer (A).
A
7
is displayed on the
to print the menu
.
OFF