Ryobi PBT01B Manual Del Operador página 18

 Lay a square flat on the miter table. Place one leg of the
square against the fence. Slide the other leg of the square
against the flat part of saw blade.
NOTE: Make sure that the square contacts the flat part
of the saw blade, not the blade teeth.
 The edge of the square and the saw blade should be
parallel as shown in figure 17.
 If the front or back edge of the saw blade angles away
from the square as shown in figures 18 - 19, adjustments
are needed.
SQUARE
MITER
MITER
FENCE
TABLE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
SQUARE
MITER
MITER
FENCE
TABLE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
ASSEMBLY
SOCKET HEAD
SCREW(S)
BLADE
Fig. 18
BLADE
INDICATOR
Fig. 19
18 − English
FENCE
SCREW
PARTIAL
SLIDING
MITER
FENCE
MITER
FENCE
BEVEL
SCALE
SCALE
INDICATOR
SCREW
MITER SCALE
SOCKET HEAD
SCREW(S)
Fig. 20
BEVEL
LOCK KNOB
INDICATOR
SCREW
Fig. 21
SCALE
INDICATOR
Fig. 22