Troubleshooting - Wagan Tech Smart AC 210 USB Manual De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Smart AC
210 USB Inverter by Wagan Tech
®
CAUTION
Refer to the battery manufacturer's safety instructions for proper battery
installation and operation.
NEUTRAL FLOATING: Do not connect to the inverter any AC products
whose neutral conductor is connected to the ground.
THE ELECTRICITY GENERATED BY THE INVERTER IS MODIFIED SINE
WAVE. Do not use the inverter to power the following devices: Small
appliances such as rechargeable flashlights, some razors, and some
rechargeable night lights that plug into a wall outlet for recharge. Some
battery chargers for rechargeable tools.
Before using Wagan's inverter, please check the equipment
manufacturer's manual and specification to check if the equipment is
capable of being charged properly without damaging it.
www.wagan.com
3
®
User's Manual—Read before using this equipment

TROUBLESHOOTING

Problem: AC product does not operate, green light does not light
Probable Cause
AC product connected is rated at
more than 210 watts; overload
shutdown occurs.
High starting surge has caused
overload shutdown even though AC
product connected is rated at less
than 500 watts.
Lighter socket or 12 volt outlet may
require ignition to be switched on.
Poor contact with lighter socket or 12
volt outlet.
Battery is discharged.
Fuse blown in vehicle.
Problem: Buzzing sound in audio systems
Inexpensive stereo systems have inadequate internal power supply filtering,
causing a buzzing sound. A system with a high quality filter is the only solution.
For additional technical support please e-mail [email protected]
©2012 Wagan Corporation. All Rights Reserved.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
Suggested Remedy
Use product with a power rating of
less than 210 watts.
Product exceeds inverter's surge
capability. Use a product with starting
surge power of less than 500 watts.
Turn ignition key to accessory
position.
Press inverter firmly into the lighter
socket. Make sure the socket is clean.
Recharge battery.
Inspect and replace the fuse for this
circuit in the vehicle's fuse panel.
4
Tabla de contenido
loading

Tabla de contenido