For the safety of your child, before every journey in the car check that...
• the child seat is firmly installed in the vehicle.
• the belt is not twisted.
• the diagonal belt is only clamped by the lock-off which is located on the opposite
side from the car seat belt buckle.
• the straps of the child safety seat are close to the body without constricting the
child.
• the shoulder belts
• the shoulder pads
• the buckle latches are engaged in the harness buckle (E).
4.3 GROUP 2 (15-25 kg). Vehicle belt+ Top tether
1. Follow the steps in section 4.2 (to fix child seat by three point belt).
2. Take the top tether and if required, lengthen the belt by pressing
the top tether brake button to release the strap, pulling to adjust as
necessary (fig. 23).
3. Hook the snap hook into the Top Tether anchoring point recommended
in your vehicle owner's guide (fig.24).
TIP: Look for this symbol in your vehicle.
4. To tension the top tether, remove any slack by pulling on the free end
of strap until it is suitably tightened. The top tether will be properly
tightened when the tension indicator turns completely green
(fig.25/A).
5. Follow the steps in section securing your child with 5-point harness.
For the safety of your child, before every journey in the car check that...
• the child seat is firmly installed in the vehicle.
• the belt is not twisted.
• the Top Tether is tightly tensioned over the backrest of the car seat and the
tension indicator is green.
• the diagonal belt is only clamped by the lock-off which is located on the opposite
side from the car seat belt buckle.
• the straps of the child safety seat are close to the body without constricting the
child.
• the shoulder belts (D) are correctly adjusted and the straps are not twisted.
• the shoulder pads (C) are at the same level as your child's shoulders.
• the buckle latches are engaged in the harness buckle (E).
30
(D)
are correctly adjusted and the straps are not twisted.
(C)
are at the same level as your child's shoulders.