Technical Data - BOMANN TSG 7404 Instrucciones De Servicio

Problem Possible cause / Action
White film
Hard water minerals: clean the interi-
on inside
or by using a damp sponge with
surface
dishwasher detergent. Wear rubber
gloves.
Unsatisfac-
∙ Improper loading ∙ dishes are re-
tory drying
moved too soon ∙ wrong program has
result
been selected ∙ use of cutlery with a
low-quality coating
Error codes
For some malfunctions, the control lamps will show
the following error to warn you:
Control lamps
Meaning / Possible cause
flashes
Water inlet fault! Faucet not open,
inlet blocked or water pressure too
low.
Malfunction of heating element.
ECO Overflow / water leakage!
ECO
Failure of communication between
main PCB with display PCB.
CAUTION:
 If overflow occurs, turn off the main water supply
before calling an authorized technician.
 If there is water in the lower housing part due to
an overfilling or a small leak, remove this water
before restarting the appliance.
NOTE:
If a problem persists after following the steps above,
please contact your distributor or an authorized tech-
nician.

Technical Data

Electrical connection / Water supply....................
Connection voltage: ...............220-240 V~ / 50 Hz
Connection power: .....................1.170 – 1.380 W
Water pressure: .............................0.04 – 1 Mpa
Dimension H x W x D / Weight...........................
Unit size: ..........................43.8 x 55.0 x 50.0 cm
Net weight: .......................................ca. 19.0 kg
Available accessory.........................................
Inlet hose safety system: ..........Art.-No. 8900 410
For more information about the product, scan the QR
code on the supplied energy label and/or visit the
official website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains
reserved.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
67