Panels Dimensions Single Bottom - Drawer - Fulgor Milano Professional 36 Built-In Serie Guia De Instalacion

EN

5.4 Panels Dimensions Single Bottom - Drawer

Panels can have thickness ranging between 18 mm (3/4")
and 28 mm (1-1/8").
Door panels can have a maximum weight 23 kg (51 lbs)
and drawer panels may be a maximum weight of 11kg
(25 lbs)
Exceeding these weights could void your warranty for any
service issues which can be attributed to overweight panels.
The hinging mechanism on appliances is considered to be
`Zero-clearance`. The door and drawer widths specified
below assume the minimum niche width is being used and
a 3.5mm (1/8") reveal is desired around the panels. Adjust
Example:
84" niche height
36" niche width
4" toe kick height
1/8" gap desired all around
Door panel:
Width: 35-3/4"
Height: 54-3/4"
14
your panel dimensions accordingly to your own design
criteria considering your niche width and your reveal.
Minimum reveal / gap should not be less than 1.5mm
(1/16").
SERIES
36"
24"
3 ( ⁄ ")
A
Drawer panel:
Width: 35-3/4"
Height: 84"-1/8"-54-3/4"-1/8"-4"=25"
If you want a 6" toe kick height then your bottom drawer
panel height would be 23"
DOOR/DRAWER DOOR CUTOUT
WIDTH A WIDTH B
897 (35 1/4")
597 (23 1/2") 327 (12 7/8")
min 200 (7 ⁄ ")
135 135
(5 ⁄ ") (5 ⁄ ")
115 (4 ½")
B