Fulgor Milano Professional 36 Built-In Serie Guia De Instalacion página 27

• Purge air from the water lines by running the 'Manual
Clean' function from the Menu->Functions->Water Filter
options. You may need to complete this sequence several
times until you stop hearing air sputtering from the ice
maker fill tube (Refer to your Use & Care Manual).
• Once you are satisfied that the system is purged of air
switch the Ice Maker on by touching the
will illuminate.
NOTE
If the Fresh Zone drawer is configured as a Fridge or a
Fresh compartment the ice maker will be disabled. Default
mode for the Fresh Zone drawer is Freezer.
• For further information about the appliance operation,
refer to the User Manual.
NOTE
If at the first start - up the message Stand by does not
appear, but other messages appear, such as Fridge too
warm, Freezer too warm, or sound signals are activated,
it means that the appliance has already started the
cooling process. If this is the case, deactivate any possible
acoustic signals by pressing the Alarm button, close the
door and wait until the set temperature is reached.
IMPORTANT
It is necessary to let the unit reach the correct temperature
before foods are stored inside.
button which
EN
25