Overview; Instructions For Use - VWR Compact Star CS4 Manual De Instrucciones

Overview:

This manual provides important safety information for the VWR Laboratory centrifuge. It
should be kept near the centrifuge for quick and easy reference.

Instructions for Use:

ATTENTION: Never attempt to operate the centrifuge with rotors or adapters
that show signs of corrosion or mechanical damage. Never centrifuge strongly
corrosive materials that may damage the rotors or accessories.
Closing the lid:
After the rotor has been properly secured and loaded, close the centrifuge lid, making
sure that the interlock has been engaged.
Lid lock:
The centrifuge can be started only with the lid securely closed. Do not attempt to open
the lid until the end of run signal "00" is displayed on both the "RPM Display" and "Time
Display".
Speed selection:
The speed (rpm) can be selected from 300 to 6,500rpm with the "RPM Adjustment
Knob" (right). The set speed can be viewed at all times on the large "RPM Display"
(right).
Selection of operating time and momentary operation:
Time can be selected in half minute intervals from 0.5 to 10 minutes, and in one minute
intervals from 11 to 30 minutes. Time can also be set to continuous/hold by turning the
"Time Adjustment Knob" (left) past the thirty minute position. The "Time Display" in the
continuous setting will read "On". When the pre-selected time expires, the centrifuge will
stop automatically. To stop the centrifuge prior to the expiration of set time, press the
"RPM Adjustment Knob" (right).