Idiomas disponibles
Idiomas disponibles
KMDL-01
Pen-type Digital Multimeter
will indicate "OL". Shorted devices will indicate near 0V and
an open device will indicate "OL" in both polarities.
9.DC/AC Current Measurements
Caution: Do not make more than 400mA current measurements
for longer time. it will damage the instruction.
Rotate the function switch to the character "
" on the instrument,
press Mode Button to choose DC or AC Current, Touch
the black test probe tip to the negative side of the circuit. Touch
the metal probe tip to the positive side of the circuit. Read
the voltage in the display.
10.NON-contact Voltage
Rotate the function switch to the character "NCV" on the
instrument, let the head of the instrument near the meausred
matter,
if the voltage of the matter more than 50V, the NCV indication
will light.
Auto Power Off
•When the function switch isn't rotated and the button of the
instrument isn't pressed after 15 minutes, the instrument will
•turn off the power (in the sleeping). In this mode if you press any
button or rotate the function switch, the instrument will
•work (be awaking).
•When you rouate the function switch to turn on the power, the
auto power off symbols "
" will show the LCD display.
•Before instrument will auto power off, it announce you by sound
five beep.
Battery replace
WARNING: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery cover.
www.grupotemper.com
7
