Idiomas disponibles
Idiomas disponibles
1.Safety Instructions
This meter has been designed for safe use, but must be operated
with caution. The rules listed below must be carefully
followed for safe operation.
•NEVER apply voltage or current to the meter that exceeds the
specified maximum:
Function
VAC
V DC or V AC
mA DC
Resistance Continuity 250Vrms for 15sec max
•USE EXTREME CAUTION when working with high voltages.
•DO NOT measure voltage if the voltage on the "COM" input
jack exceeds 500V above earth ground.
•NEVER connect the meter leads across a voltage source while
the function switch is in the current, resistance, or diode
•mode. Doing so can damage the meter.
•ALWAYS discharge filter capacitors in power supplies and
disconnect the power when making resistance or diode tests.
•ALWAYS turn off the power and disconnect the test leads before
opening the doors to replace the fuse or batteries.
•NEVER operate the meter unless the back cover and the battery
and fuse doors are in place and fastened securely.
Pen-type Digital Multimeter
User Manual
Input Limits
Maximum Input
600V DC/AC
600V DC/AC, 200Vrms on 200mV
range
200mA 250V fast acting fuse
