Insert The Batteries - TFA 60.2561.55 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
TFA_No. 60.2561_Anleitung
Radio-controlled alarm clock with temperature
CAUTION
• Unauthorized repairs, alterations or changes to the product are pro-
hibited.
• Do not expose the device to extreme temperatures, vibrations or
shocks.
• Clean the instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Protect it from moisture!
5. Elements
A: Display (Fig. 1):
A 1:
Daylight Saving Time (DST) symbol
A 2:
DCF reception symbol
A 4:
Indoor temperature
A 6:
Date
B: Buttons (Fig. 1):
B 1:
AUTO LIGHT ON/OFF switch
B 2:
TIME SET button
B 3:
DOWN button
B 4:
UP button
B 5:
RESET button
B 6:
ALARM SET button
18
18.12.2020
12:42 Uhr
Seite 10
A 3:
Alarm symbol
A 5:
Day of the week
A 7:
Time
Radio-controlled alarm clock with temperature
B 7:
ALARM ON/OFF switch
B 8:
SNOOZE/LIGHT button on the top
C: Housing (Fig. 1+2):
C 1:
Light sensor
C 2:
Battery compartment
6. Getting started

6.1 Insert the batteries

• Open the battery compartment and insert two new AA 1.5 V batter-
ies, polarity as illustrated.
• The backlight turns on for a short period. The device will alert you
with a beep and all LCD segments will be displayed for a short
moment. Close the battery cover again.
6.2 Radio-controlled time reception
• The clock will now scan the DCF frequency signal and the DCF sym-
bol flashes on the display. When the time code is successfully
received after some minutes, the radio-controlled time and the DCF
symbol will be shown steadily on the display. In Daylight Saving
Time DST is shown on the display.
• If there is no reception, you can start the initialisation manually.
Press and hold the DOWN button for 3 seconds.
• The DCF symbol flashes.
19
Tabla de contenido
loading

Tabla de contenido