Setting The Alarm - TFA 60.2514 Instrucciones De Uso

TFA_No. 60.2514_Anleit_02_13
Radio-controlled alarm clock with thermometer
• Press the MODE button to make the settings in the following
sequence: minutes, year, month and day. The last press of the but-
ton sets the seconds to 00.
• Press and hold the "-" button to adjust the language for the week-
day: English (EN), German (GE), Italian (IT), French (FR), Spanish
(ES), Dutch (NE), Swedish (SW).
• When the language you want is displayed, release the button.
7.2 Display of temperature, alarm time and dual time
• Each press on the MODE button will change the display between:
Indoor temperature
AL 1
AL 2
Dual time

7.3 Setting the alarm

• Select the alarm function you want with the MODE button:
AL 1
AL 2
• Set the alarm time in the respective alarm mode.
• Press and hold the MODE button for 3 seconds.
• The hour digits are flashing.
• Press the "+" or "-" button to set the time you want.
• Confirm with the MODE button.
• Set minutes in the same way.
20
05.02.2013 14:57 Uhr Seite 11
Radio-controlled alarm clock with thermometer
• Confirm with the MODE button and the alarm is activated.
• To activate or deactivate the alarm function, press the
, , + or no alarm symbol appears on the display.
• When the alarm time is reached, the alarm signal will sound and
increase gradually in frequency and volume.
• The respective alarm symbol
will come on for 5 sec. Press the
• You can activate the snooze function by pressing the LIGHT/SNOOZE
button on the top.
• Zz appears and the alarm will be interrupted for 4 minutes.
• If it is not stopped deliberately, the alarm will automatically turn
off after 4 minutes and will be reactivated for the same time.
7.4 Time setting with time zone
• The time zone setting is needed for countries where the DCF signal
can be received but the time zone is different from the DCF time.
• Press and hold the "+" button in normal mode (time/temperature
display) for three seconds.
• appears on the display.
• Press and hold the MODE button for three seconds.
• The hour digit starts to flash. Press the "+" or "-" button to make a
correction of the hours from the DCF time.
• Confirm with the MODE button.
• Press and hold the "+" button in normal mode (time/temperature
display) to change between DCF time and time zone (Display
button.
or flashes and the backlight
button to stop the alarm.
).
21