Cleaning The Product - Tecno-gaz LC001Z17 Manual De Uso Y Mantenimiento

Application method
Frequency
Possibility of damaging the
MU_023 Rev.2
Product.
28/10/2019
OPERATION AND
MAINTENANCE MANUAL
Do not spray detergent / disinfectant directly on Product.
Spray the detergent / disinfectant on a cloth so as to dampen it.
Afterwards wipe the Product with the cloth.
Failure to comply with the above instructions could cause:
detaching of paint with possible accidental dropping of such
-
paint into the patient area;
early ageing of the plastic parts with consequent weakening
-
and the possibility of breakages;
tarnishing of the protection screens and glass.
-

6.2 Cleaning the Product

We recommend you to clean the Product every day.
Do not use sharp, pointed or abrasive objects, to avoid the risk
-
of damaging surfaces.
Do not pour liquids directly on the Product.
-
Clean the Product with a damp, but not wet, cloth.
-
Clean with suitable detergents with low alkaline content and
-
chlorine free. Do not use abrasive products, petrol, paint
thinners, alkaline detergents, acids, containing alcohol or
aldehydes.
Dose the detergents strictly according to the percentage
-
indications shown on the manufacturer's technical sheet, being
careful that no liquids penetrate into the joints of the various
Product parts, with special care give to the reflector and
supporting structure.
EN
Page 16 of 32