Tecno-gaz LC001Z17 Manual De Uso Y Mantenimiento página 64

Recommended separation distance between portable and mobile RF communications equipment and the Product
The Product is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the Product can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters) and the Product as
recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
MU_023 Rev.2
MAINTENANCE MANUAL
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1.2√P
0.12
0.38
1.2
3.8
12
28/10/2019
OPERATION AND
m
150 kHz to 80 MHz
d = 1.2√P
0.12
0.38
1.2
3.8
12
EN
150 kHz to 80 MHz
d = 1.2√P
0.12
0.38
1.2
3.8
12
Page 30 of 32