Environmental Protection; Declaration Of Conformity - Worx Sonicrafter WX679 Manual Original

We recommend that you purchase your
accessories listed in the above list from the
same store that sold you the tool. Use good
quality accessories marked with a well-known
brand name. Refer to the accessory packaging
for further details. Store personnel can assist
you and offer advice.
NOTE: When plunging and sawing use a slight
pendulum motion, to allow sufficient chip
removal.
The saw blade lasts longer if the wear
is distributed evenly. To ensure an even
distribution, loosen the saw blade, rotate it
and retighten firmly.
Cut/Sand with a constant movement and light
pressure.
Heavy pressure does not increase the cut/
removal rate – the accessory merely wears
faster.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
12 12
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or retailer for
recycling advice.
Oscillating Tool
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Description
WORX Sonicrafter
Type WX679 WX679.2 WX679.3
WX679.4 WX679.11 WX680 WX680.1
WX680.2 WX681 (6-designation of
machinery, representative of high
frequency oscillation tool)
Function Sanding, sawing, rasping,
scraping, polishing
Complies with the following directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to
EN 60745-1
EN 60745-2-4
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the technical file,
Name: Russell Nicholson
Address: Positec Power Tools (Europe)
Ltd, PO Box 6242, Newbury, RG14 9LT,
UK
Suzhou 2016/03/17
Allen Ding
Deputy Chief Engineer,Testing & Certification
®
EN