Operational Instructions; Touch Sensitive Control Panel - Haier HWF5300AW Manual Del Usuario

OPERATIONAL INSTRUCTIONS

Control Panel
WARNING: To reduce risk of fire, electric shock or injury to persons, read
"Important Safety Instructions" before operating this appliance.
1) Power ON/OFF Pad
Touch pad to power ON or turn OFF the washer. In off status touch power pad for 1
second washer will turn on in default program status (Normal/Casual Cycle). To turn off
washer touch pad for at least 2 seconds during running or just one second during the
pause and stand by status. To change or cancel a running cycle touch this pad to power
off and then reprogram.
2) Cycle Select
water temperature, soil level spin speed and options. In certain cycles the settings can
manually be programmed to suit your needs.
3) Start/Pause Pad
activity during the wash cycle. If you don't touch the start/pause pad within 5 minutes of
selecting a cycle, the washer will automatically shut off. You could pause the running cycle
to change the options by pressing the "Start / Pause" pad.
4) Soil Level
soil level in clothes. The dirtier the clothes the heavier the level.
5) Rinse Level
to Eco which gives you the least.
Baby Care rinse level gives extra rinse time to remove any soap and detergent left on
clothes after wash. While Eco. rinse would be used on the cycle where extra rinse time may
not be needed.
6) Spin Speed
to change the preprogrammed selection. Selections may vary per the cycle chosen. All
selections are not available in all cycles. Certain clothes are not recommended to be spun
at high speeds. Please see clothes manufacturer recommendation for best results.

TOUCH SENSITIVE CONTROL PANEL

English
12