Installation; Voltage Selection; Operation - GNATUS Amalga Mix II Manual Del Propietário

inStAllAtiOn

For your safety, this equipment is originally
with the voltage selector key posicionate on 220V,
if it is necessary change the voltage pruced as
it follows:

voltage selection

Verify the selector key (08) in the interior part
of the delivery unit/box, then change the position
of the key, according to the local net (127V or
220V).
Attention: Don't make the change of the
voltage with the equipment on.

OPeRAtiOn

• Connect the plug (05) in the
power line.
• Work the switch (07) in the back
part.
• Select the operation time 0
to 30 sec. following the maker's
orientation to the capsule pre dosed.
- to increase the time.
-to decrease the time.
• Open the cover (01) and place
the capsule in the tongs (02).
• Close the cover (01) and press
the Start key (12) to start the cycle.
• In the end of each cycle the
display will return to the initial time,
being ready for a new cycle.
• If it is necessary to interrupt the
cycle press the Stop key (11).
Note: The fixation tongs (02)
of the capsules, were developed to
house the conventional capsules,
as well as the capsules of direct
application.
08
07
05
12
17
127V
220V
02
01
11