6. Troubleshooting
CAUTION: Risk of product damage. This product contains
sensitive electronic components. Use care not to damage pins and
connectors during troubleshooting.
NOTE: For service parts information, visit your product page at
kohler.com.
Faucet Troubleshooting Table
Symptoms
1.
No water flow.
2.
Low water flow.
Kohler Co.
Probable Causes
Recommended Action
A. Closed
A. Open the supply stops.
supply stops.
B. Handle is in
B. Rotate the handle to the
the closed
open position. Refer to
the "Faucet Operation"
position.
section.
C. The hot
C. Confirm that the
and/or cold
supply hoses are not
supply hose
kinked. If coiled,
is kinked.
maintain an inside
diameter of 3" (76 mm).
D. Battery
D. Check for the red
power is low
flashing LED on the
or exhausted.
sensor. Refer to the
"Install the Batteries"
section.
E. Refer to the "Cleaning
E. Clogged
sprayhead or
the Screens" section.
valve box
screen.
A. The supply
A. Confirm that the
stops are
supply stops are fully
partially
open.
closed.
B. Handle is
B. Rotate the handle to the
partially
full open position.
closed.
C. The hot
C. Confirm that the
and/or cold
supply hoses are not
supply hose
kinked or twisted. If
is kinked or
coiled, maintain an
twisted.
inside diameter of 3"
(76 mm).
D. Refer to the "Cleaning
D. One or more
screens are
the Screens" section.
clogged.
13
1320925-2-C