D-Link Dir-610N+ Guía De Instalación Rápida página 4

TrOUBLESHOOTING
ENGLISH
set-uP AND CoNFiGurAtioN ProBlems
1. HOW DO I CONFIGUrE mY DIr-610N+ rOUTEr FOr A PErSONALIZED
WIrELESS NETWOrK NAmE (SSID) AND WIrELESS ENCrYPTION KEY?
- connect your pc to the router using an ethernet cable.
- open a web browser and enter the address http://dlinkrouter.local.
- the default username is 'admin'. the default password is to leave the field blank.
- If you have changed the password and can not remember it, you will need to reset the router to
set the password back to a blank field.
2. HOW DO I rESET mY DIr-610N+ TO FACTOrY DEFAULT SETTINGS?
- ensure the router is powered on.
- press and hold the reset button on the rear of the device for 10 seconds.
note: Resetting the router to factory default will erase the current configuration settings. to re-
configure your settings, log into the router as outlined in question 1, then run the setup Wizard.
3. HOW DO I ADD A NEW WIrELESS CLIENT Or PC IF I HAVE FOrGOTTEN mY
WIrELESS NETWOrK NAmE (SSID) Or WIrELESS ENCrYPTION KEY?
- every pc that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless network name (ssId) and encryption key.
- use the web based user interface (as described in question 1 above) to check or choose your
wireless settings.
- Make sure you write down these settings so that you can enter them into each wirelessly
connected pc. You will find a dedicated area on the back of this document, this important
information for future use.
4. WHY CAN I NOT GET AN INTErNET CONNECTION?
- For cable network users, please log in web based user interface to make sure the Mac clone
address is set up properly in the Internet settings.
- For broadband network users, please log in web based user interface to make sure the user
name and password are correct in the Internet settings.
4
Dir-610N+