Chapter 1. General Description. Technical Characteristics - gala gar GAR CUT 1050 Manual Técnico De Instrucciones

CHAPTER 1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The cutting function of the GAR CUT (V.
Industrial) machines is carried out by electric
plasma blown with compressed air. They can cut
all kinds of electricity conductor material: Steel,
stainless steel, aluminium, brass, etc.
Table nº 1 – Maximum cutting thicknesses.
GAR CUT (V. Industrial)
MAXIMUM
RECOMMENDED
THICKNESS
MATERIAL
GAR CUT GAR CUT
1050
SOFT STEEL 20 mm
STAINLESS
20 mm
STEEL
ALUMINIUM 16 mm
The GAR CUT (V. Industrial) equipment is
designed for industrial use and offers an duty cycle
of 60% for the maximum cutting power.
Table no. 2 - Main technical characteristics of GAR CUT (V. Industrial) equipment.
TECHNICAL CHARACTERISTICS.
Supply voltage (U
Maximum primary intensity (I
Primary effective intensity (I
Plasmagen gas
Operating air pressure
Flowrate
Adjustment positions
Cutting thicknesses up to
Thermal insulation
Ventilation
Protection index.
Weight
Application standards
GAR CUT (V. INDUSTRIAL). Instructions Manual.
LIMIT THICKNESS
GAR CUT GAR CUT
1350 1050 1350
25 mm 25 mm 30 mm
25 mm 25 mm 30 mm
20 mm 19 mm 28 mm
–3Ph 50Hz)
1
1eff
Fig. 1 – Dimensions of GAR CUT (V. Industrial) equipment.
A Euro-connector is located on the front of the
equipment which enable you a quick connection of
welding torch supplied.
supplied with the equipment:
- Cutting torch P-150.
- Safety protection CE.
- Protection goggles.
- Quick connection earth cable.
For use of any other accessory check with the
manufacturer.
This equipment
overheating, lack of pressure in pneumatic circuit,
overloads in the control circuit, contacts with
dangerous voltages during the replacement of
torch head components and protection against
cutting without earth return.
GAR CUT 1050
Ref. 458.00.000
230/400 V
)
61/36 A
1max
)
48/28 A
AIR
5,5-6 bar
175-210 l/min
I 50 A (100%)
II 90 A (60%)
25 mm
H (180ºC)
FORCED
IP21
143 KG.
EN 60974
RUEDA MOVIL
The following are
has protection
GAR CUT 1350
Ref. 459.00.000
230/400 V
73/42 A
57/33 A
AIR
5,5-6 bar
175-210 l/min
58 A (100%)
110 A (60%)
30 mm
H (180ºC)
FORCED
IP21
157 KG.
EN 60974
RUEDA FIJA
13
against: